Houston, TX · Licensed & Insured · Free Estimates
Chain-Link Sliding Driveway Gate in Houston, TX
A galvanized steel chain-link sliding gate on heavy-duty galvanized posts — the preferred gate configuration when swing arc is not available in Houston driveways.
Get a Free Estimate(346) 639-4333
Overview
About the Chain-Link Sliding Driveway Gate
A chain-link sliding driveway gate moves horizontally along the driveway opening on a ground-level V-groove track and rollers, rather than swinging in or out. This makes it the correct solution when a driveway has insufficient setback for swing gates — adjacent slopes, small front yards, or properties directly bordering the street. The single-panel sliding design also creates an unobstructed full opening.
Galvanized steel sliding gates are extensively used in commercial and industrial applications in Houston — automotive yards, warehouses, school bus facilities, and municipal lots. Residential sliding chain-link gates are increasingly popular in Houston's inner-loop properties where small setbacks make swing gates impractical. The system requires a level concrete track strip along the gate path.
Materials & Construction
Frame: 2-inch OD galvanized Schedule 40 steel pipe welded. Gate width: 1.5-2x the opening width (panel must retract fully to one side). Mesh: 11.5 gauge galvanized chain-link. Rollers: V-groove steel wheels on galvanized bottom track. Top guide channel: galvanized C-channel on top guide rail post. Operator options: LiftMaster SL585, FAAC 746, or Viking D5011.
All chain-link components are hot-dip galvanized per ASTM A392 specification. Galvanized coating weighs 0.8 oz/sq ft (Class 1 zinc), providing 20-35 year corrosion protection in Houston's coastal climate. Vinyl-coated (black or green) versions add an additional polyvinyl chloride coating over the galvanized substrate for extended service life and improved appearance.
Key Features
No Swing Arc Needed
Sliding gates retract parallel to the fence line — no clearance in front or behind required. The only space needed is beside the opening for the gate panel to park when open.
Full-Width Opening
A single sliding panel opens the full driveway width without a center post — maximizing clear opening for wide loads, RVs, and side-by-side vehicle access.
Commercial Grade
Sliding chain-link gates use heavier-gauge track, rollers, and frame than swing gates. Industrial-grade V-groove roller wheels on galvanized track provide decades of reliable operation.
Automation Ready
All chain-link driveway gates can be fitted with slide or swing gate operators. Chain-link gates are lightweight relative to their span — reducing motor requirements and extending operator lifespan versus heavier solid panel gates.
Low Maintenance Cost
Galvanized chain-link gates require no painting or sealing. Annual inspection of hinges, rollers, and latch mechanism is the only maintenance needed. Vinyl-coated versions require even less — just hose off periodically.
Free Estimates
Written estimates within 24-48 hours. 18-month no-interest financing available. We handle all permits for residential and commercial chain-link gate projects.
See Our Chain-Link Gate Installations
Pricing in Houston, TX
Chain-link sliding driveway gates in Houston typically range from $1,500 to $3,500 installed (gate only). Automation adds $900-$1,800. Free written estimates within 24-48 hours. 18-month no-interest financing available.
Serving All of Greater Houston
Houston · Katy · Sugar Land · The Woodlands · Pearland · Baytown · Cypress · League City · Humble · Spring · Pasadena · Richmond · Conroe · Galveston · Bellaire · River Oaks · Memorial · Friendswood · Tomball · Deer Park
Frequently Asked Questions
Does a chain-link sliding gate need a concrete track?
Yes — sliding chain-link gates require a level concrete strip (typically 4-inch wide, 4-inch deep) embedded with the V-groove track along the gate travel path. This is included in our installation service.
How wide can a chain-link sliding driveway gate be?
Chain-link sliding gates are commonly made in 12-20 foot drive widths. The gate panel itself must be wider than the opening — a 16-foot opening requires approximately an 18-foot panel, which parks to one side when open.
What does a chain-link sliding driveway gate cost in Houston?
Chain-link sliding driveway gates in Houston typically range from $1,500 to $3,500 installed (without automation), depending on width. Adding a slide gate operator adds $900-$1,800.
Get Your Custom Chain-Link Sliding Driveway Gate
Free estimate · Licensed & Insured · 18-Month Financing
Get Your Free Estimate(346) 639-4333