Houston, TX · Licensed & Insured · Free Estimates
One Side Arch Swing Iron Gate in Houston, TX
A single arched iron gate panel swings open from one post — the classic ornamental gate profile for driveways and entrances where a single-panel configuration is preferred.
Get a Free Estimate(346) 639-4333
Overview
About the One Side Arch Swing Iron Gate
A one side arch swing iron gate features a single gate panel with an arched top profile, hinged to swing from one side post. The single arched panel creates an elegant, formal entrance point while opening the full driveway width — ideal for standard residential driveways where a single panel can span the full width, or for entries up to approximately 8-10 feet wide.
The single arched panel is a classic ornamental gate configuration seen on historic Houston properties from the 1920s through today. The arch top profile adds architectural character and visual height, making the gate appear more substantial than its actual dimensions. For driveways wider than 10-12 feet, a double arch split swing configuration is typically more appropriate.
Fabrication & Materials
Gate frame is 1.5-inch or 2-inch square steel tube, with the arch top formed from curved tube bent to precise radius. Pickets are 1-inch square bar. The single post receives a 4-inch schedule 40 steel pipe set in 42-inch concrete with an additional brace post. Heavy-duty hinges are welded to both the gate frame and the post sleeve for maximum stability.
All Mustang Fencing iron gates are custom-fabricated in our Houston shop. Hot-dip galvanized then powder-coated at 400°F. Gate posts are 3" or 4" schedule 40 steel pipe set in 42-inch concrete footings. Heavy-duty ball-bearing hinges rated for the gate's weight. We offer manual, keypad, and solar-powered automated options.
Key Features
Classic Arch Profile
The arched top is the most recognizable ornamental gate profile. A single arch swing gate immediately establishes architectural character and visual distinction at your property entrance.
Single Post Entry
The single-panel swing allows entry from one side post — ideal for asymmetrical driveways, narrow entries, or configurations where a double gate would require a center post.
Automation Available
Single arch swing gates are fully compatible with single-arm automation operators. Most single-panel residential gates can be automated for under $800 in operator and installation cost.
Powder-Coat Durability
Galvanized steel plus 400°F powder coat resists Houston's humidity, UV, and salt air for 30-50 years with minimal maintenance.
Automation Ready
All gates are compatible with LiftMaster, Mighty Mule, and solar-powered automation. Keypad, remote, and app-based access control options available.
Free Estimates
Written estimates within 24-48 hours. 18-month no-interest financing available. We handle all permits on your behalf.
See Our Iron Gate Installations
Pricing in Houston, TX
One side arch swing iron gates in Houston typically range from $1,400 to $4,500 installed. Free written estimates within 24-48 hours. 18-month no-interest financing available.
Serving All of Greater Houston
Houston · Katy · Sugar Land · The Woodlands · Pearland · Baytown · Cypress · League City · Humble · Spring · Pasadena · Richmond · Conroe · Galveston · Bellaire · River Oaks · Memorial · Friendswood · Tomball · Deer Park
Frequently Asked Questions
What is the maximum practical width for a single-panel arch swing gate?
Single-panel swing gates are practical up to approximately 10-12 feet wide. Wider than that, the single panel becomes very heavy and the hinge post loading increases significantly — a dual panel is recommended.
Can I get a single arch gate to match an existing double arch fence?
Yes — we frequently fabricate single arch walk-in or single-panel driveway gates to match existing iron fence patterns and finishes. Bring photos for a precise match.
What does a one side arch swing iron gate cost in Houston?
One side arch swing iron driveway gates in Houston typically range from $1,400 to $4,500 installed, depending on width, height, and automation.
Get Your Custom One Side Arch Swing Iron Gate
Free estimate · Custom fabricated · 18-Month Financing
Get Your Free Estimate(346) 639-4333